The Method Of Making Clogs Mainly Has The Following Steps

The rough embryos of clogs are first made by machine, then pasted with embroidered patterns, and nailed on the clogs. It is more traditional and saves time and effort, but the style is relatively fixed and unchanged, and it lacks the intimacy of handwork, not to mention the handwork It can be made according to left and right foot shapes! The production method of handmade clogs mainly has the following steps:
1. Drawing: To turn a piece of wood into a pair of clogs, you must first select the wood that has been dried in the shade, and then use a template to draw the initial shape of the clogs on the wood, and cut it by machine or manually. When it is separated, it will naturally have a radian, and everything is For a pair, not a single part goes to waste.
2. Drying: After the initial shape is sawed out with a machine, it should be exposed to the sun for about a week to make the clogs less perishable.
3. Cutting: Use an ax to cut out the curvature of the edge of the shoe delicately.
4. Soaking: Soak the initial shape of the clogs in a bucket filled with water, so that the clogs will not be hard to grind due to dry wood during the planing process.
5. Planing: On the specially-made inclined platform, the master bends his feet and pushes them up to fix the clogs and start to grind them.
6. Re-planing: Clogs are worn on the feet. Of course, they must be worn comfortably. The master carefully modifies the surface, edges and corners of the clogs or the heel of the clogs to make them smooth.
7. Lacquer: paint the polished clog shoe platform with layer after layer of varnish.
8. Nails: Finally, put nail ears on the surface of the clogs, and the pair of clogs is completed.
9. Clogs: Plain and clean, it is nostalgic for the formation of ancient clogs.