Production Process Of PVC Foam Slippers
Apr 19, 2023
Leave a message
The sole of PVC foam slippers is produced by molding and foaming process, the main operation is as follows.
①Ingredient kneading Pour the raw material PVC resin into the kneader, and then add various additives for heating and kneading. The heating steam pressure is about 0.29MPa, and the material is discharged after kneading for about 45~60 minutes.
②Plastication of the pull sheet The kneaded mixture is sent to the double-roller plastic mixer for plastication of the pull sheet. The plastication temperature is controlled at about 130°C.
③ Molded blanks are punched into pieces according to the model (generally rectangular) drawn after mastication. According to the design and color required by the sole, the pieces of various colors can be matched, and then the pieces are weighed according to the capacity of the mold cavity. Weighing should be more accurate to prevent overflow or lack of material. Then send the mold with the sheet material into the hot press machine for heating, plasticization, foaming, cooling and shaping after foaming, and then demoulding to take out the plasticized blank. The process conditions for molding damage are: molding plasticization temperature 160~165°C. The heating steam pressure is 0.686~0.784MPa, the molding pressure is 4.9MPa, the molding time is 10~20min, the cooling setting temperature is 50℃, and the cooling setting time is 20min.
④Heat treatment The purpose of heat treatment is to further heat and foam the blank under normal pressure to obtain a foamed shoe sole sheet. Make it foam, and the foamed sheet material of the foamed slippers bottom is sent out of the drying room and then sent to the warehouse to park for a week before being sent to be punched.
⑤Blanking and assembling: punch out the foam sheet material into a slipper base sample according to the specifications and dimensions of the slipper, then drill holes, and assemble it with the slipper strap to obtain the finished slipper.

